|
SELF-CLINCHING FASTENERS
Self-Clinching fasteners are threaded nuts, studs, or standoffs that are mechanically pressed into sheet metal to provide solid fastening points. Nuts can be used to accept bolts, standoffs can be inserted for mounting circuit boards and studs can be used for mounting connectors. See FIG 1 below. They are sometimes referred to by the most common brand, called ´PEMS ®´, which is a trademark of Penn Engineering & Manufacturing Corp (http://www.pemnet.com). They are a very useful item and solve a lot of component mounting problems.
|
| FIG 1 (A) |
Protocase stocks a large assortment of self-clinching fasteners and will install for a very reasonable cost.
| Stand Offs - Sizes Stocked |
| Thru Hole |
| 4-40 x 1/4", 5/16", 3/8", 7/16", 1/2", 9/16" |
| 6-32 x 1/4", 5/16", 3/8", 7/16", 1/2", 9/16" |
| 8-32 x 1/4", 3/8", 1/2", |
| 10-32 x 1/2" |
| M3 x 3mm, 4mm, 6mm, 8mm, 14mm |
| M4 x 6mm, 12mm |
| M5 x 12mm |
| Blind |
| 4-40 x 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" |
| 6-32 x 5/16", 3/8", 7/16", 1/2", 9/16", 1" |
| 8-32 x 5/16", 1/2" |
| 10-32 x 3/8", 5/8" |
| Nuts - Size Stocked |
| 2-56, 4-40, 6-32, 8-32, 10-32, 10-24, 1/4-20 |
| M3, M4, M5, M6 |
| Studs - Size Stocked |
| 2-56 x 1/4", 1/2" |
| 4-40 x 1/4", 3/8", 1/2", 5/8", 3/4" |
| 6-32 x 1/4", 3/8", 1/2", 5/8", 3/4" |
| 8-32 x 1/4", 3/8", 1/2", 5/8", 3/4" |
| 10-32 x 3/8", 1/2" |
| 10-24 x 3/8", 1/2" |
| 1/4-20 x 1/2", 1" |
| M3 x 8mm, 10mm, 12mm, 15mm, 18mm |
| M4 x 8mm, 10mm, 12mm, 15mm, 18mm |
| M5 x 12mm |
| M6 x 12mm |
|
|
